GaAs end edge solar panel with coils

GaAs end edge solar panel with coils

Article: SXC-SGE-03

1 640 EURO
_ +
Description
Options
Documents

Sputnix Orbicraft-Pro solar panel SXC-SGE-03 use GaAs photo-electric converters and has built-in electromagnetic coils.  
  
The panel is suitable for top and bottom edges of 1U CubeSats, both Sputnix and ISIS frames, several panels can be combined for 2U and 3U frames. The panel has a built-in electromagnetic orientation coil.
There is a 13 mm diameter aperture at the panel center with M2 mount holes for sun sensors or similar payloads.

Features:
•    Robust mechanical design with protective cover
•    Compatible panels with SPUTNIX and ISIS CubeSats structures
•    Super-diode protection circuit
•    Built-in planar coil
•    Scalable power and coils using several panels
•    Calibration report for every item

Configuration:
•    Protective cover (two options)
•    Connectors count

 

Download 3D model

Properties

Dimensions

98 х 98 х 8.6 mm (1.7 mm depth w/o connector)

Mass

32 g

Interfaces

Hirose GT8E connectors, scalable

Perfomance

Cell type

GaInP/GaAs/Ge on Ge substrate

Open Circuit Voltage (Voc)

5.3 V

Short Circuit Current (Isc)

500 mA

Voltage at max. Power (Vmp)

4.7 V

Current at max. Power (Imp)

480 mA

Efficiency

28%

Coil equivalent area

1.9 m2 (typ.)

Coil resistance

200 Ohm

Operationg conditions

Operating temperature range

-40...+105°С

Storage temperature

-50..+105°С

Mechanical vibration

12 g (request full test report)

Mechanical shock

50g (request full test report)

Testing*

Functional

QT, AT

Vibration

QT, AT (on  demand)

Mechanical shock

QT

Thermal cycling

QT, AT (on  demand)

Thermal vacuum

QT, AT (on  demand)

*QT is performed on the design/qualification model
AT is performed on the unit to be shipped

Ask more info

See more

Development kit

SXC-DK-02

1 770 EURO
X-band antenna

SXC-AXP-01

1 450 EURO
1U CubeSat structure

SXC-F1U-02

1 420 EURO
Motherboard with Raspberry-Pi + Soft

SXC-MB-04-RPI

1 970 EURO