Satellites in orbit


Mass - 1,45 kg
Purpose - Ed-Scientific sat
The launch date - 15.08.18

The scientific and educational satellites SiriusSat-1 and SiriusSat-2 were assembled by schoolchildren in cooperation with SPUTNIX specialists on the basis of the nanosatellite platform OrbiCaft-Pro developed by the company. The platform has a standardized international standard size CubeSat 1U. The satellite SiriusSat have been further developed to meet the specifics of launch: they have a handle for launching an astronaut, flexible antennas, a system for the manual activation of spacecraft, and also equipped with specially designed protective quick-release covers and soft shipping containers. The weight of each satellite is about 1.45 kg. The payload of the satellite is a space particle detector for studying "space weather". The sensor was developed by the Research Institute of Nuclear Physics of the Moscow State University and was assembled with the participation of a group of schoolchildren from the Sirius Educational Center.

The SiriusSat satellite was demonstrated to the President of the Russian Federation Vladimir Putin in Sochi during his visit to the educational center Sirius in the summer of 2017. Then the children who designed the spacecraft asked the question of the possibility of the subsequent launch of the satellite they built. Roskosmos helped in organizing free-of-charge sending to orbit within the framework of the corporation's program for the free launch of Russian school and student satellites. Subsequently, it was decided that two identical spacecraft - SiriusSat-1 and SiriusSat-2 would be launched into space at once.

The satellites passed additional checks at RSC Energia before being sent to the ISS. The satellites were launched to the station at July 10, 2018 on board the Progress-MS-09.


The satellites are expected to be deployed during EVA from ISS on 2018 August 15. Expected start of beaconing is 2018-08-15T16:23Z. Each satellite transmits beacon every 30 secs.


Amateur radio info

Radio amateurs from all over the world are welcome to participate in receiving of SiriusSat signals. There is a telemetry decoding software(SPUTNIX Telemetry Viewer) which provides text and visual monitoring and helps to understand all the data transmitted down from the orbit. By default software is connected to to help us collecting precious data from SiriusSats, but it can also operate in standalone mode.

Frequences and call signs:

1) SiriusSat-1 call sign RS13S, transmitter frequency is 435,570 MHz SSID 1.

2) SiriusSat-2 call sign RS14S, transmitter frequency is 435,670 MHz SSID 2.

Both use GMSK 4800 modulation with AX.25 G3RUH standard protocol.

SPUTNIX Telemetry Viewer can be used along with typical SDR software like Orbitron/SDRSharp and UZ7HO's SoundModem/direwolf through AGWPE/KISSTCP interfaces. Configuration file path is "resources/config.xml".

To get Dire Wolf working in 4800 G3RUH mode it is possible to twice both sampling and bit rates. Like:

$ direwolf -r 96000 -B 9600

assuming native 48000 audio sample rate...

Test signal recordings:

SiriusSat_RS15S_TestSignal_20180807_173227Z_AF.wav - plain audio.

SiriusSat_RS15S_TestSignal_20180807_173353Z_435750kHz_IQ.wav - I/Q from SDRSharp.

Test signals are with different call sign (from backup satellite RS15S).

Download SPUTNIX Telemetry Viewer (Win RU)

Download SPUTNIX Telemetry Viewer (Win ENG)

Download SPUTNIX Telemetry Viewer (Linux RU)

Download SPUTNIX Telemetry Viewer (Linux ENG)


Download Test I/Q Signal

Download Test Audio Signal (FM demodulated)